EtherCAT Terminals: new coupler series reduces costs and space requirements in the terminal box
In addition to the connection of fieldbuses, the EK18xx coupler series integrates digital I/Os into the standard coupler.
14.02.12
09.02.12
EtherCAT-based power measurement terminal enables high-precision current control
The IETV Elektrotechnik AB and the Swedish Transport Agency use PC-based Control for power supply of the Swedish railways.
The IETV Elektrotechnik AB and the Swedish Transport Agency use PC-based Control for power supply of the Swedish railways.
08.02.12
Ethernet controller with USB input offers additional interface
With the CU8880 USB-to-LAN adapter, Industrial PCs can be extended with an additional industrially-suited and independent Ethernet interface.
With the CU8880 USB-to-LAN adapter, Industrial PCs can be extended with an additional industrially-suited and independent Ethernet interface.
03.02.12
Beckhoff receives the Microsoft Embedded Partner Excellence Award 2011 in the category “Innovation”
Beckhoff has been awarded the Windows Embedded Partner Excellence Award by Microsoft for the fourth time running.
Beckhoff has been awarded the Windows Embedded Partner Excellence Award by Microsoft for the fourth time running.
02.02.12
Tire Technology Expo 2012, Cologne/Germany: PC-based Control for the Tire and Rubber Industry
Beckhoff presents its automation solutions for the whole range of the tire production process in Hall 8, Booth 8025, at Tire Technology Expo from 14.02. - 16.02.2012 in Cologne, Germany.
Beckhoff presents its automation solutions for the whole range of the tire production process in Hall 8, Booth 8025, at Tire Technology Expo from 14.02. - 16.02.2012 in Cologne, Germany.
31.01.12
8-port Ethernet switch for gigabit applications
The CU2208 Ethernet switch offers eight RJ 45 Gbit Ethernet ports and can be used in the field of real-time-capable industrial Ethernet solutions as an unmanaged switch.
The CU2208 Ethernet switch offers eight RJ 45 Gbit Ethernet ports and can be used in the field of real-time-capable industrial Ethernet solutions as an unmanaged switch.
26.01.12
World class concert acoustics with Beckhoff automation technology
At a controller relaunch the hall acoustics of the Sibelius Hall in Finland has been optimised with PC-based Control from Beckhoff.
At a controller relaunch the hall acoustics of the Sibelius Hall in Finland has been optimised with PC-based Control from Beckhoff.
24.01.12
Compact EtherCAT Bus Coupler
The “Compact” BK1150 Bus Coupler offers a cost-optimised alternative to the BK1120 EtherCAT Bus Coupler.
The “Compact” BK1150 Bus Coupler offers a cost-optimised alternative to the BK1120 EtherCAT Bus Coupler.
19.01.12
Real-time Ethernet port multiplier
The CU2508 allows the connection of eight independent Ethernet networks to one PC.
The CU2508 allows the connection of eight independent Ethernet networks to one PC.
17.01.12
Drive Technology – Compact drive solutions up to 5 A
The product overview “Compact Drive Technology” provides a comprehensive overview of the drive solutions in the lower performance range.
The product overview “Compact Drive Technology” provides a comprehensive overview of the drive solutions in the lower performance range.
12.01.12
Secure exchange of data between PROFIsafe and TwinSAFE networks
The EL6930 EtherCAT Terminal enables the construction of a network with up to 127 TwinSAFE devices and offers a gateway function between secure TwinSAFE and PROFIsafe networks.
The EL6930 EtherCAT Terminal enables the construction of a network with up to 127 TwinSAFE devices and offers a gateway function between secure TwinSAFE and PROFIsafe networks.
10.01.12
Interview on the release of TwinCAT 3
TwinCAT 3 extends the standard automation world and utilises benefits of the PLC and IT worlds.
TwinCAT 3 extends the standard automation world and utilises benefits of the PLC and IT worlds.
03.01.12
Success for “Finn-Power” with PC-based NC controller from Beckhoff
Prima Power achieved high accuracy and productivity in the field of fast punching technology with PC-based Control from Beckhoff.
Prima Power achieved high accuracy and productivity in the field of fast punching technology with PC-based Control from Beckhoff.
20.12.11
The new AM8000 servomotor integrates the feedback system into one standard motor cable.
The rotary synchronous servomotors, which are available in standard and stainless steel designs, are characterised by high dynamics, energy efficiency and low costs.
The rotary synchronous servomotors, which are available in standard and stainless steel designs, are characterised by high dynamics, energy efficiency and low costs.
15.12.11
Stiwa: EtherCAT Box modules form the basis for innovative assembly concept
At its high-performance laser welding plant for gearbox component manufacturing Stiwa relies on control technology from Beckhoff.
At its high-performance laser welding plant for gearbox component manufacturing Stiwa relies on control technology from Beckhoff.
14.12.11
High-end measurement: high-precision resistance measurement in a wide range
The EtherCAT Terminal EL3692 enables direct resistance measurement in a range between 10 mΩ and 10 MΩ with a resolution of 24 bits.
The EtherCAT Terminal EL3692 enables direct resistance measurement in a range between 10 mΩ and 10 MΩ with a resolution of 24 bits.
07.12.11
Planetary gear units for AM3100 Synchronous Servomotors
The AG2250 series is specially matched to the AM3100 motor series and completes in combination with the EL7201 servo terminal the drive technology range.
The AG2250 series is specially matched to the AM3100 motor series and completes in combination with the EL7201 servo terminal the drive technology range.
01.12.11
A plea for more production efficiency
Interview with Hans Beckhoff on the official release of TwinCAT 3, energy efficiency and sustainability
Interview with Hans Beckhoff on the official release of TwinCAT 3, energy efficiency and sustainability
21.11.11
First Beckhoff Automation UpDate in Turkey met with great interest
Beckhoff held an Automation UpDate in Turkey for the first time ever on 21 October 2011.
Beckhoff held an Automation UpDate in Turkey for the first time ever on 21 October 2011.
18.11.11
PC-Control 04'11 is online
The issue of the Beckhoff company magazine "PC Control" is online.
The issue of the Beckhoff company magazine "PC Control" is online.
03.11.11
Swiss precision meets Beckhoff automation technology
The Swiss company Monnier + Zahner AG automates its dental drill grinding machines with TwinCAT CNC.
The Swiss company Monnier + Zahner AG automates its dental drill grinding machines with TwinCAT CNC.
02.11.11
Sales offensive in Sweden: new branch offices opened in Stockholm and Gothenburg
Beckhoff Automation AB of Sweden has strengthened its sales activities and extended its expertise in the field of building automation by opening new locations in Gothenburg and Stockholm.
Beckhoff Automation AB of Sweden has strengthened its sales activities and extended its expertise in the field of building automation by opening new locations in Gothenburg and Stockholm.
27.10.11
Connectivity: from sensors to the IT cloud
With ADS (Automation Device Specification), PC-based control technology offers a scalable communication solution.
With ADS (Automation Device Specification), PC-based control technology offers a scalable communication solution.
26.10.11
Scientific Automation: High measurement accuracy over a large frequency range
Power monitoring terminal for the highly precise measurement of voltage and current
Power monitoring terminal for the highly precise measurement of voltage and current
18.10.11
PC-based Control for CNC machining
The new technology flyer gives an overview of the PC- and EtherCAT-based CNC solution that integrates all machine functions into one hardware and software platform.
The new technology flyer gives an overview of the PC- and EtherCAT-based CNC solution that integrates all machine functions into one hardware and software platform.
13.10.11
Scientific Automation integrates high-tech special functions into automation
Beckhoff Product Manager Michael Jost and Dr. Josef Papenfort in an interview with the PC Control editorial team.
Beckhoff Product Manager Michael Jost and Dr. Josef Papenfort in an interview with the PC Control editorial team.
11.10.11
Beckhoff Automation UpDate India
Launch of Automation UpDate 2011 in India generates significant interest
Launch of Automation UpDate 2011 in India generates significant interest
07.10.11
5-port Fast Ethernet Switch: Compact design in full metal housing
In comparison to the 8-port switch, the CU2005 offers more space in the control cabinet.
In comparison to the 8-port switch, the CU2005 offers more space in the control cabinet.
28.09.11
First “Asia Pacific Sales Meeting” in Shanghai, China
The first “Beckhoff Asia Pacific Sales Meeting (APSM)” took place from 14 to 17 September in Shanghai.
The first “Beckhoff Asia Pacific Sales Meeting (APSM)” took place from 14 to 17 September in Shanghai.
26.09.11
Motek 2011, Stuttgart, Germany: Compact drive solutions up to 5 A directly in the Bus Terminal
Beckhoff presents its compact and modular drive technology with scalable performance in Hall 9, Booth 9108, from October 10 to 13.
Beckhoff presents its compact and modular drive technology with scalable performance in Hall 9, Booth 9108, from October 10 to 13.
21.09.11
Test rig technology: seamless integration of measurement technology in the control system
EtherCAT ensures flexibility of the control concept in the area of test rig technology at Sitia.
EtherCAT ensures flexibility of the control concept in the area of test rig technology at Sitia.
14.09.11
PC-based Control: The scalable, complete CNC package
Beckhoff presents its CNC control solutions for machine tools in Hall 25, Booth E32 at EMO 2011 from 19.09. - 24.09.2011 in Hanover, Germany.
Beckhoff presents its CNC control solutions for machine tools in Hall 25, Booth E32 at EMO 2011 from 19.09. - 24.09.2011 in Hanover, Germany.
08.09.11
25 years of PC Control – From the Idea to the World Standard
For 25 years Beckhoff has delivered PC based machine controllers which have found the widest use worldwide today.
For 25 years Beckhoff has delivered PC based machine controllers which have found the widest use worldwide today.
01.09.11
Beckhoff at EU PVSEC from 05.09. - 08.09.2011 in Hamburg, Germany
Beckhoff presents automation solutions for the photovoltaic production in Hall A4, Booth A23.
Beckhoff presents automation solutions for the photovoltaic production in Hall A4, Booth A23.
25.08.11
Level of automation increases to keep up with demand
For production of garage doors Hörmann in Switzerland uses the open PC- and EtherCAT-based automation platform.
For production of garage doors Hörmann in Switzerland uses the open PC- and EtherCAT-based automation platform.
23.08.11
Motek 2011: Compact drive solutions up to 5 A directly in the Bus Terminal
Scalability and slender designs provide for competitive advantages in assembly and handling technology
Scalability and slender designs provide for competitive advantages in assembly and handling technology
18.08.11
Universal automation concept for 3-axis CNC machining center
For automation of the machining of control cabinets Steinhauer uses PC-based Control from Beckhoff.
For automation of the machining of control cabinets Steinhauer uses PC-based Control from Beckhoff.
17.08.11
EMO 2011: The scalable, complete CNC package
The universal CNC solution from machine tool operating panel to safe servo drive.
The universal CNC solution from machine tool operating panel to safe servo drive.
16.08.11
Beckhoff at EU PVSEC 2011 in Hamburg, Germany
PC-based control steers all process steps in photovoltaic production.
PC-based control steers all process steps in photovoltaic production.
11.08.11
Slotbox – Decentralised PCI Express and PCI slots
By using different versions of the C9900-E2xx slotbox both PCI and PCI Express card slots are available.
By using different versions of the C9900-E2xx slotbox both PCI and PCI Express card slots are available.
09.08.11
Blow Molding Controller leads to optimised production
For the production of high-quality plastic items ThreePlus uses the PC-based automation platform.
For the production of high-quality plastic items ThreePlus uses the PC-based automation platform.
08.08.11
PCI Express cards: no limits for PROFIBUS process data
The PROFIBUS fieldbus cards with PCI Express interface can be optionally equipped with NOVRAM memory cards.
The PROFIBUS fieldbus cards with PCI Express interface can be optionally equipped with NOVRAM memory cards.
05.08.11
Simple cabling for EtherCAT Box modules
The overview shows the comprehensive range of accessories with connection examples.
The overview shows the comprehensive range of accessories with connection examples.
04.08.11
Bowling robot shows the way to the perfect game
For precise control of a bowling robot the company ARM Automation uses the PC- and EtherCAT-based platform.
For precise control of a bowling robot the company ARM Automation uses the PC- and EtherCAT-based platform.
02.08.11
Panel PC with memory extension
The Panel PCs of the CP77xx-0030 series with Intel® Atom™ are now available with 2 GB DDR2RAM as well.
The Panel PCs of the CP77xx-0030 series with Intel® Atom™ are now available with 2 GB DDR2RAM as well.
28.07.11
XFC – EtherCAT Terminal with oversampling technology
The EL4712 analog output terminal generates output signals in the range between 0 and 20 mA.
The EL4712 analog output terminal generates output signals in the range between 0 and 20 mA.
26.07.11
10 years of Beckhoff China
Interview with Liqiang Liang, Managing Director of Beckhoff China
Interview with Liqiang Liang, Managing Director of Beckhoff China
21.07.11
PC-based Control in the stage and show technology
Flying by Foy uses PC-based Control and EtherCAT for the automation of flight simulations.
Flying by Foy uses PC-based Control and EtherCAT for the automation of flight simulations.
15.07.11
14.07.11
Fast and cost-saving packaging technology
KOCH Pac-Systeme uses TwinCAT and EtherCAT for the control of packaging machines.
KOCH Pac-Systeme uses TwinCAT and EtherCAT for the control of packaging machines.
07.07.11
Optimised logistics at London Heathrow Airport
PC Control controls automatic scanning system of the baggage handling system
PC Control controls automatic scanning system of the baggage handling system
06.07.11
Flexible and efficient control solutions for the Packaging Machine
The new solutions flyer gives an overview of “PC-based Control for Packaging Machines”.
The new solutions flyer gives an overview of “PC-based Control for Packaging Machines”.
05.07.11
Acquisition of consumption data over M-Bus master terminal
The Bus Terminal KL6781 enables the integration from electricity, water, gas or energy meters over M-Bus.
The Bus Terminal KL6781 enables the integration from electricity, water, gas or energy meters over M-Bus.
28.06.11
PC Control for wind turbines – Fuzzy controller for improved pitch control
Professional article in Computer & Automation 06/2011
Professional article in Computer & Automation 06/2011
21.06.11
DMX interface for lighting and stage equipment
The EtherCAT Terminal EL6851 allows as a DMX master the direct connection of up to 32 DMX devices.
The EtherCAT Terminal EL6851 allows as a DMX master the direct connection of up to 32 DMX devices.
06.06.11
The pioneer of Industrial PCs – 25 years of PC Control
Interview with Hans Beckhoff in Elektro Automation 06/2011
Interview with Hans Beckhoff in Elektro Automation 06/2011
26.05.11
Twizzle, the fully automated sailing yacht
Beckhoff embedded controllers set sail
Beckhoff embedded controllers set sail
24.05.11
Fast process cycles for orbital riveting
The CNC orbital riveter cell from KMT is based on a modular machine concept with a PC- and EtherCAT-based control platform.
The CNC orbital riveter cell from KMT is based on a modular machine concept with a PC- and EtherCAT-based control platform.
19.05.11
Beckhoff at Ligna from 30.05. - 03.06.2011 in Hanover, Germany
Beckhoff presents automation solutions for woodworking machines in Hall 23, Booth A24.
Beckhoff presents automation solutions for woodworking machines in Hall 23, Booth A24.
17.05.11
4-channel digital output terminal switches loads in selectable polarity
With the KL2284, DC motors can be used in both directions of rotation.
With the KL2284, DC motors can be used in both directions of rotation.
12.05.11
Embedded PCs process 40,000 data points on the Basel Nordtangente
Beckhoff technology controls operations and safety systems of the urban expressway.
Beckhoff technology controls operations and safety systems of the urban expressway.
06.05.11
New generation of 3½-inch motherboards from Beckhoff for multi-core processors
The heart of the new Industrial PC generation is the new CB3054 motherboard from Beckhoff.
The heart of the new Industrial PC generation is the new CB3054 motherboard from Beckhoff.
03.05.11
Controller relaunch for CNC processing centers
The French machine manufacturer Thibaut is specialized in stone working machines.
The French machine manufacturer Thibaut is specialized in stone working machines.
28.04.11
Slide-in Industrial-PC features flat design
The space-saving C5210 19-inch slide-in Industrial PC measures only one height unit.
The space-saving C5210 19-inch slide-in Industrial PC measures only one height unit.
26.04.11
High-precision thermocouple terminal with open-circuit recognition
The EL3314-0010 EtherCAT Terminal allows four thermocouples to be connected directly.
The EL3314-0010 EtherCAT Terminal allows four thermocouples to be connected directly.
19.04.11
Multi thermocouple module with EtherCAT interface
12 or 32 thermocouples can be connected to a FM33xx-B110 fieldbus module.
12 or 32 thermocouples can be connected to a FM33xx-B110 fieldbus module.
15.04.11
New subsidiary opens in Israel
Beckhoff consolidates its sales network in the Middle East
Beckhoff consolidates its sales network in the Middle East
13.04.11
The Beckhoff servo terminal
Complete servo drive in a compact EtherCAT Terminal
Complete servo drive in a compact EtherCAT Terminal
08.04.11
EtherCAT keeps everything under control
State-of-the-art factory produces 700 tons of flat glass a day
State-of-the-art factory produces 700 tons of flat glass a day
05.04.11
Complex stage and theatre technology with PC- and EtherCAT-based control
New control solution for Schauspielhaus renovation in Nuremberg
New control solution for Schauspielhaus renovation in Nuremberg
30.03.11
25.03.11
TwinSAFE – Flexible choice of the programming language
More at Hannover Messe 2011:
Hall 9, Booth F06.
More at Hannover Messe 2011:
Hall 9, Booth F06.
21.03.11
Strengthening the market presence in Southeast Asia
Beckhoff opens subsidiary in Singapore
Beckhoff opens subsidiary in Singapore
15.03.11
High performance for extreme climates
The majority of the EtherCAT Box modules in IP 67 are specified for the extended temperature range of -25 to +60 °C.
The majority of the EtherCAT Box modules in IP 67 are specified for the extended temperature range of -25 to +60 °C.
08.03.11
Beckhoff at Prolight + Sound 2011 from 06 – 09 April 2011:
The fair for Audio and Lighting Equipment and Event and Communications Technology in Frankfurt, Germany Press release
The fair for Audio and Lighting Equipment and Event and Communications Technology in Frankfurt, Germany Press release
04.03.11
Real-time Ethernet port multiplier
The CU2508 allows the connection of eight independent Ethernet networks.
The CU2508 allows the connection of eight independent Ethernet networks.
02.03.11
CX5000 Embedded PC with optional audio interface:
The CX5000 enables the connection of e.g. a surround loudspeaker system.
The CX5000 enables the connection of e.g. a surround loudspeaker system.
23.02.11
Robotics is an integral part of TwinCAT software:
With TwinCAT Kinematic Transformation the robots can be integrated seamlessly into the PC controller.
With TwinCAT Kinematic Transformation the robots can be integrated seamlessly into the PC controller.
15.02.11
TwinCAT 3 – the film:
Beckhoff experts explain the highlights of eXtended Automation
Beckhoff experts explain the highlights of eXtended Automation
03.02.11
Stepper motor EtherCAT Box
The EP7041-2002 EtherCAT Box is intended for the direct connection of different Stepper Motors. The motor is connected via a plug.
The EP7041-2002 EtherCAT Box is intended for the direct connection of different Stepper Motors. The motor is connected via a plug.
27.01.11
EtherCAT Box with ID switch
The three hexadecimal ID switches of the EP1111 can assign an ID to a group of EtherCAT components.
The three hexadecimal ID switches of the EP1111 can assign an ID to a group of EtherCAT components.
25.01.11
Industrial PC:
CU8890 WLAN controller enables wireless integration of Industrial PCs
CU8890 WLAN controller enables wireless integration of Industrial PCs
20.01.11
Sine/cosine encoder interface in the EtherCAT I/O system
The EL5021 EtherCAT Terminal enables the direct connection of a measuring sensor to the EtherCAT Terminal system.
The EL5021 EtherCAT Terminal enables the direct connection of a measuring sensor to the EtherCAT Terminal system.
11.01.11
Industrial PCs:
New stainless steel mounting arm adapter for stainless steel Panel PCs and Control Panels
New stainless steel mounting arm adapter for stainless steel Panel PCs and Control Panels
22.12.10
PC- and EtherCAT-based engine test bench technology:
Optimized engine technology leads to VW victory at 2010 Dakar Rally
Optimized engine technology leads to VW victory at 2010 Dakar Rally
20.12.10
Safety technology:
EP1908 EtherCAT Box with eight fail-safe inputs
EP1908 EtherCAT Box with eight fail-safe inputs
15.12.10
New control concept for advanced plate bending machines:
Clever giants bend 320 mm plates in a cold forming process
Clever giants bend 320 mm plates in a cold forming process
13.12.10
Flexibility increases for the C69xx IPC series:
Compact Industrial PCs with new PCI and PCIe card extensions
Compact Industrial PCs with new PCI and PCIe card extensions
09.12.10
XFC in the printing industry:
Eltromat takes full advantage of PC-based control and EtherCAT for register control
Eltromat takes full advantage of PC-based control and EtherCAT for register control
07.12.10
Industrial Ethernet:
EtherNet/IP Bus Coupler in a compact design
EtherNet/IP Bus Coupler in a compact design
30.11.10
Scientific Automation:
High-precision temperature measurement and signal acquisition for Miele quality assurance
High-precision temperature measurement and signal acquisition for Miele quality assurance
30.11.10
30 years of Beckhoff Automation:
Interview with Hans Beckhoff
Interview with Hans Beckhoff
26.11.10
TwinCAT 3 Engineering:
Visual Studio® 2010 for automation
Visual Studio® 2010 for automation
24.11.10
"PC Control" is online
The November issue of the Beckhoff company magazine "PC Control" is online.
The November issue of the Beckhoff company magazine "PC Control" is online.
23.11.10
23.11.10
Beckhoff elevates Motion division
Fertig Motors GmbH, which is cooperating in a joint venture with the Beckhoff Group, will co-develop and produce highly dynamic Beckhoff servomotors.
Fertig Motors GmbH, which is cooperating in a joint venture with the Beckhoff Group, will co-develop and produce highly dynamic Beckhoff servomotors.
18.11.10
EXPO 2010 Shanghai
Beckhoff technology controlled the movement of the energy center in the German pavilion.
Beckhoff technology controlled the movement of the energy center in the German pavilion.
11.11.10
DC motor output stages extend the EtherCAT I/O range
The EL7332 and EL7342 EtherCAT Terminals enable direct operation of DC motors and are electrically isolated from the E-bus.
The EL7332 and EL7342 EtherCAT Terminals enable direct operation of DC motors and are electrically isolated from the E-bus.
05.11.10
“Compact” Bus Terminal Controller with RS485 interface
The BC8050 brings the number of Bus Terminal Controllers offered by Beckhoff to 21.
The BC8050 brings the number of Bus Terminal Controllers offered by Beckhoff to 21.
03.11.10
Intel® dual core processors with ATX form factor
Beckhoff extends its range of Industrial PCs with ATX motherboard with a new generation.
Beckhoff extends its range of Industrial PCs with ATX motherboard with a new generation.
28.10.10
Serial interfaces in compact IP 67 box
EtherCAT Box with freely selectable RS232 or RS422/RS485 interfaces
EtherCAT Box with freely selectable RS232 or RS422/RS485 interfaces
26.10.10
25.10.10
07.10.10
Multimedia presentation: PC Control with Intel® Atom™ processors
“High Performance – Low Power” is the motto of the Industrial PCs/Embedded PCs with Intel® Atom™ CPU.
“High Performance – Low Power” is the motto of the Industrial PCs/Embedded PCs with Intel® Atom™ CPU.
30.09.10
PC-based building automation for the "office of the future"
In its new subsidiary in Cologne Microsoft is combining cutting-edge IT and media technology with state-of-the-art building functions.
In its new subsidiary in Cologne Microsoft is combining cutting-edge IT and media technology with state-of-the-art building functions.
30.09.10
High-quality, proven control components for wind turbines
The gearless Vensys wind turbines are characterized by their simplicity and quality.
The gearless Vensys wind turbines are characterized by their simplicity and quality.
30.09.10
PC-based control technology streamlines blow molding machines
The plastics processing industry is confronted with constantly increasing demands on performance.
The plastics processing industry is confronted with constantly increasing demands on performance.
30.09.10
Beckhoff Finland celebrates its 10th birthday
The Beckhoff subsidiary in Finland was established ten years ago with a single member of staff at TechVilla business park in Hyvinkää.
The Beckhoff subsidiary in Finland was established ten years ago with a single member of staff at TechVilla business park in Hyvinkää.
21.09.10
TwinCAT PLC library for IEC 61400-25 wind power plant communications standard
‘TwinCAT Telecontrol Configurator’ reduces engineering costs in wind energy applications.
‘TwinCAT Telecontrol Configurator’ reduces engineering costs in wind energy applications.
17.09.10
"PC Control" is online
The September issue of the Beckhoff company magazine "PC Control" is online.
The September issue of the Beckhoff company magazine "PC Control" is online.
23.08.10
Fast EtherCAT communication with the DMX world
Beckhoff is supplementing the EtherCAT I/O range by a DMX slave – the EL6851-0010 EtherCAT Terminal.
Beckhoff is supplementing the EtherCAT I/O range by a DMX slave – the EL6851-0010 EtherCAT Terminal.
18.08.10
Large industrial displays
Beckhoff has extended its Control Panel and Panel PC series with a larger 24" display.
Beckhoff has extended its Control Panel and Panel PC series with a larger 24" display.
16.08.10
Enhanced and expanded packaging automation
At FachPack 2010 Beckhoff is presenting stainless steel Control Panels and motors with “washdown” housing for the packaging industry.
At FachPack 2010 Beckhoff is presenting stainless steel Control Panels and motors with “washdown” housing for the packaging industry.
28.07.10
06.07.10
BK9053 PROFINET Bus Coupler
The BK9053 Bus Coupler is optimised for cost-sensitive applications and is manufactured in a slim housing design.
The BK9053 Bus Coupler is optimised for cost-sensitive applications and is manufactured in a slim housing design.
22.06.10
"PC Control" is online
The June issue of the Beckhoff company magazine "PC Control" is online.
The June issue of the Beckhoff company magazine "PC Control" is online.
16.06.10
Beckhoff Automation UpDate
Launch of Automation UpDate 2010 generates significant interest
Launch of Automation UpDate 2010 generates significant interest
11.06.10
Beckhoff establishes subsidiary in Malaysia
Beckhoff Automation is maintaining its growth offensive and strengthening its presence in the South-East Asian market with its own subsidiary in Malaysia.
Beckhoff Automation is maintaining its growth offensive and strengthening its presence in the South-East Asian market with its own subsidiary in Malaysia.
04.06.10
News overview Building Automation
New products extend the automation components of building automation
New products extend the automation components of building automation
20.05.10
Panel PCs and Control Panels in stainless steel finish
The new CP77xx Panel PCs and the Control Panels of the CP79xx series in stainless steel finish are control and display units that meet the strict hygiene regulations for the food, packaging and medical industries as well as for cleanrooms.
The new CP77xx Panel PCs and the Control Panels of the CP79xx series in stainless steel finish are control and display units that meet the strict hygiene regulations for the food, packaging and medical industries as well as for cleanrooms.
20.05.10
Digital multimeter in the EtherCAT terminal
With the EL3681 digital multimeter terminal, Beckhoff has added enhanced measurement technology functions to its EtherCAT I/O system.
With the EL3681 digital multimeter terminal, Beckhoff has added enhanced measurement technology functions to its EtherCAT I/O system.
22.04.10
Positive business development for 2010
Beckhoff Automation earns 236 million euros worldwide in 2009
Beckhoff Automation earns 236 million euros worldwide in 2009
21.04.10
Robots at Beijing Opera
The controller of the Beijing Opera robots was developed at the University of Shanghai using Beckhoff PC-based Control.
The controller of the Beijing Opera robots was developed at the University of Shanghai using Beckhoff PC-based Control.
13.04.10
"PC Control" is online
The April issue of the Beckhoff company magazine "PC Control" is online.
The April issue of the Beckhoff company magazine "PC Control" is online.
13.04.10
Beckhoff takes over High-Def Technology GmbH
Strengthening of building and home automation
Strengthening of building and home automation
06.04.10
Industrial PC technology in high-end kitchens
SieMatic uses robust Embedded PCs from Beckhoff in its kitchens
SieMatic uses robust Embedded PCs from Beckhoff in its kitchens
29.03.10
Expansion of market position in UK
In order to further expand Beckhoff’s commitment in the British market, Hayes Control Systems has been taken over by Beckhoff and renamed Beckhoff Automation Ltd.
In order to further expand Beckhoff’s commitment in the British market, Hayes Control Systems has been taken over by Beckhoff and renamed Beckhoff Automation Ltd.
16.03.10
Stepper motor and incremental encoder interface in one IP 67 box
EP7041 motion box for the control of stepper motors
EP7041 motion box for the control of stepper motors
16.02.10
Stefan Hoppe becomes President of OPC Europe
On 8 February 2010 the OPC Foundation announced the launch of its official European subsidiary, OPC Europe.
On 8 February 2010 the OPC Foundation announced the launch of its official European subsidiary, OPC Europe.
08.02.10
Microsoft Technology Center: Green IT solution demo with Beckhoff
Microsoft and Beckhoff present a demo to control and measure power consumption, temperature, etc. The demo is shown in the Microsoft Technology Center in Munich and will also be presented at the Microsoft booth at CeBIT 2010 in Hanover.
Microsoft and Beckhoff present a demo to control and measure power consumption, temperature, etc. The demo is shown in the Microsoft Technology Center in Munich and will also be presented at the Microsoft booth at CeBIT 2010 in Hanover.
29.01.10
High-tech production for PCB assembly
Beckhoff extends manufacturing depth with the takeover of Smyczek GmbH & Co. KG
Beckhoff extends manufacturing depth with the takeover of Smyczek GmbH & Co. KG
18.01.10
New! Application Examples
The application examples provide you with ideas and usage possibilities as well as basic knowledge about the use of Beckhoff I/O terminals and TwinCAT.
The application examples provide you with ideas and usage possibilities as well as basic knowledge about the use of Beckhoff I/O terminals and TwinCAT.
09.12.09
Product innovations at SPS/IPC/DRIVES 2009
The news overview 01/2010 gives a review of the new technologies and products that were presented at SPS/IPC/DRIVES in Nuremberg, Germany.
The news overview 01/2010 gives a review of the new technologies and products that were presented at SPS/IPC/DRIVES in Nuremberg, Germany.
09.12.09
Beckhoff establishes subsidiary in Norway
With the establishment of the subsidiary in Tønsberg, Beckhoff now has a comprehensive distribution network for the northern European market.
With the establishment of the subsidiary in Tønsberg, Beckhoff now has a comprehensive distribution network for the northern European market.
08.12.09
Beckhoff PCIe modules – extremely flexible PCI Express plug-in cards
Compact PC cards with industrial form factor add more interfaces for Beckhoff Industrial PCs.
Compact PC cards with industrial form factor add more interfaces for Beckhoff Industrial PCs.
07.12.09
WLAN controller enables wireless integration of Industrial PCs
With the CU8890, Beckhoff is expanding its range of Industrial PC accessories via a WLAN module that is ideal for industrial use.
With the CU8890, Beckhoff is expanding its range of Industrial PC accessories via a WLAN module that is ideal for industrial use.
24.11.09
Beckhoff receives Windows Embedded Partner Excellence Award 2009
For the second year in succession, Microsoft presents Beckhoff with the Windows Embedded Partner Excellence Award.
For the second year in succession, Microsoft presents Beckhoff with the Windows Embedded Partner Excellence Award.
06.11.09
"PC Control" is online
The November issue of the Beckhoff company magazine "PC Control" is online.
The November issue of the Beckhoff company magazine "PC Control" is online.
26.10.09
SSD as optional hard disk replacement
Unlike hard disks, solid-state disks (SSD) are storage media in which no rotating parts are installed via the use of semiconductor memory devices.
Unlike hard disks, solid-state disks (SSD) are storage media in which no rotating parts are installed via the use of semiconductor memory devices.
12.10.09
High Density Bus Terminals from Beckhoff: 16 channels in 12 mm
Beckhoff has expanded its IP 20 I/O systems by a new generation of Bus Terminals increasing the I/O packing density. The ‘High Density’ Bus Terminals feature 16 digital channels in the housing of an electronic 12 mm terminal block.
Beckhoff has expanded its IP 20 I/O systems by a new generation of Bus Terminals increasing the I/O packing density. The ‘High Density’ Bus Terminals feature 16 digital channels in the housing of an electronic 12 mm terminal block.
30.09.09
Panel PCs "Powered by Wonderware"
Beckhoff Panel PCs now also equipped as ‘Powered by Wonderware’.
Beckhoff Panel PCs now also equipped as ‘Powered by Wonderware’.
28.09.09
10 years of Beckhoff Switzerland
Beckhoff Switzerland celebrates its 10th birthday
Beckhoff Switzerland celebrates its 10th birthday
24.07.09
More efficient manual operation using Bus Terminals
The Bus Terminals for manual operation (switches or potentiometers) function as operating devices for changing process data independently of the controller.
The Bus Terminals for manual operation (switches or potentiometers) function as operating devices for changing process data independently of the controller.
24.07.09
Extension of the C69xx IPC series
The C6930 extends the compact control cabinet PC series C69xx with a variant with SATA RAID controller for mirroring two hard disks. The C6930 Industrial PC is offered with Intel® Core™ Duo or Core™2 Duo.
The C6930 extends the compact control cabinet PC series C69xx with a variant with SATA RAID controller for mirroring two hard disks. The C6930 Industrial PC is offered with Intel® Core™ Duo or Core™2 Duo.
02.07.09
From the black box into the PC
The concept of Scientific Automation is being constantly pursued and advanced with innovative products.
02.07.09
High-precision temperature measurement
With the EL3201-0020, the measuring error is reduced to ±0.1 K of the temperature measuring range.
With the EL3201-0020, the measuring error is reduced to ±0.1 K of the temperature measuring range.
12.06.09
Beckhoff implements Schtick pendulum for Microsoft
Windows CE 6.0 as a hard real-time embedded platform
25.05.09
Microsoft award for Beckhoff employee
Microsoft presents the 2009 MVP Award to Stefan Hoppe.
Microsoft presents the 2009 MVP Award to Stefan Hoppe.
14.05.09
Research & Development
Using multi-agent systems to increase system availability.
Using multi-agent systems to increase system availability.
14.05.09
Radio solutions from Beckhoff for industrial applications
WLAN or IEEE 802.15.4
WLAN or IEEE 802.15.4
30.04.09
Hanover Fair 2009 was well attended by a total of 210,000 visitors.
Highlights & Impressions from the Beckhoff booths
Highlights & Impressions from the Beckhoff booths
29.04.09
03.04.09
Slimline Panel PC saves space and energy thanks to Intel® Atom™ CPU
With the CP77xx series, Beckhoff extends its Panel PC family with another high-performance variant, this time based on Intel® Atom™ processors.
With the CP77xx series, Beckhoff extends its Panel PC family with another high-performance variant, this time based on Intel® Atom™ processors.
16.03.09
EtherCAT IP 67 I/O modules for high performance in harsh environments
With the expansion of the Beckhoff Fieldbus Box family via the EtherCAT Box, EtherCAT I/O technology no longer needs an electrical cabinet.
With the expansion of the Beckhoff Fieldbus Box family via the EtherCAT Box, EtherCAT I/O technology no longer needs an electrical cabinet.
09.03.09
Fast communication for the “DMX world” of dynamic lighting
EL6851 DMX terminal for lighting and stage equipment – seamlessly integrated into the EtherCAT I/O system
EL6851 DMX terminal for lighting and stage equipment – seamlessly integrated into the EtherCAT I/O system
04.03.09
Versatile Control Panels and Panel PCs made with stainless steel
Beckhoff PC Control for applications with stringent requirements to comply with hygiene and cleanroom regulations
04.02.09
Control Panels with integrated RFID reader
The Panel PCs CP710x, CP720x and CP770x as well as the Control Panels CP780x and CP790x with 15- or 19-inch display without membrane keyboard are available with RFID reader in the front panel.
04.02.09
Beckhoff extends Linear Servomotor range
with the motors AL2009 and AL2018 675 N or 1350 N peak force).
19.12.08
CP-Link 3 – Ethernet-based multi-display link
Ten years after the introduction of the CP-Link technology, Beckhoff now presents CP-Link 3, the next generation of this operating and visualization concept.
Ten years after the introduction of the CP-Link technology, Beckhoff now presents CP-Link 3, the next generation of this operating and visualization concept.
19.12.08
Perfect packaging with PC Control
Beckhoff Embedded PCs and TwinCAT provide reliable and flexible control for Multivac packaging machines.
Beckhoff Embedded PCs and TwinCAT provide reliable and flexible control for Multivac packaging machines.
18.11.08
"PC-Control" is online
The November issue of the Beckhoff company magazine "PC Control" is online.
The November issue of the Beckhoff company magazine "PC Control" is online.
18.11.08
Wireless data exchange in the bus terminal
The KM6551 wireless terminal enables various types of transmission, based on the
IEEE 802.15.4 standard.
The KM6551 wireless terminal enables various types of transmission, based on the
IEEE 802.15.4 standard.
31.10.08
Windows Embedded Partner Excellence Award
Beckhoff has received the 2008 Windows Embedded Partner Excellence Award in recognition of its innovative and creative application of Windows Embedded technology.
Beckhoff has received the 2008 Windows Embedded Partner Excellence Award in recognition of its innovative and creative application of Windows Embedded technology.
01.10.08
EtherCAT ensures fast, precise newspaper printing
The Swiss company Ferag AG developed production modules with Beckhoff control technology based on PC Control and EtherCAT for the Neue Zürcher Zeitung (New Zurich Times)
The Swiss company Ferag AG developed production modules with Beckhoff control technology based on PC Control and EtherCAT for the Neue Zürcher Zeitung (New Zurich Times)
01.10.08
“Configuring instead of programming”
is the motto of the TwinCAT Building Automation Framework. This approach markedly simplifies engineering and commissioning.
25.09.08
Measurement technology as an integrated component of a software PLC
The new TwinCAT Scope as a tool for Scientific Automation
The new TwinCAT Scope as a tool for Scientific Automation
07.09.08
Built-in PC for flexible IPC solutions
New Beckhoff C65xx Industrial PC series uses control cabinets as the housing
New Beckhoff C65xx Industrial PC series uses control cabinets as the housing
30.07.08
EtherCAT master synchronisation via I/O system
The EL6692 EtherCAT bridge terminal achieves distributed clock calibration between EtherCAT masters.
The EL6692 EtherCAT bridge terminal achieves distributed clock calibration between EtherCAT masters.
09.07.08
Beckhoff opens subsidiary in Slovenia
Sales network expanded in Central and South Eastern Europe.
Sales network expanded in Central and South Eastern Europe.
27.06.08
New! Solution flyer
Solution flyer for the packaging, robotic, building automation and water management industries
Solution flyer for the packaging, robotic, building automation and water management industries
18.06.08
EURO 2008: Spektakuläre Fernsehbilder mit PC-Control
Beckhoff Embedded-PCs steuern Kameraroboter SpiderCam®.
10.06.08
KL2552 motor output stage
with enhanced performance extends the Bus Terminal system.
with enhanced performance extends the Bus Terminal system.
09.05.08
Interview on future prospects for PC Control
What could an Industrial PC with 32 GB RAM and a 64-core CPU achieve?
What could an Industrial PC with 32 GB RAM and a 64-core CPU achieve?
09.05.08
Dolder Grand Hotel, Zurich
Historic landmark gets high-tech treatment: Technology meets glamour for Dolder Grand Hotel
Historic landmark gets high-tech treatment: Technology meets glamour for Dolder Grand Hotel
08.05.08
21.04.08
CB4053 extends Beckhoff Motherboard series
Intel® Atom™ platform opens up new opportunities for the PC/104 form factor.
Intel® Atom™ platform opens up new opportunities for the PC/104 form factor.
21.04.08
TwinCAT OPC UA
At Hanover Fair 2008 Beckhoff implemented the new OPC UA specification in its PC-based controllers.
At Hanover Fair 2008 Beckhoff implemented the new OPC UA specification in its PC-based controllers.
21.04.08
New Beckhoff branch office in Turkey
The opening of a subsidiary in Istanbul signifies a continuation of Beckhoff's export offensive.
The opening of a subsidiary in Istanbul signifies a continuation of Beckhoff's export offensive.
21.04.08
Beckhoff Automation increases turnover by 22 %
In 2007, Beckhoff achieved global turnover of 232 million euros with its 1,050 employees.
In 2007, Beckhoff achieved global turnover of 232 million euros with its 1,050 employees.
21.04.08
Chancellor Angela Merkel visited the Beckhoff booth
To mark the opening of Hanover Fair, Angela Merkel visited the PC Control booth in the Application Park.
To mark the opening of Hanover Fair, Angela Merkel visited the PC Control booth in the Application Park.
06.04.08
Efficient speed control for pumps and fans
The KL2791 Bus Terminal enables direct connection of single-phase AC motors up to 100 W.
The KL2791 Bus Terminal enables direct connection of single-phase AC motors up to 100 W.
27.03.08
New Automation Technology interactive
Online presentations about EtherCAT and Safety over EtherCAT technologies
22.02.08
Digital Compact Servo Drive AX5000
The AX5000 Servo Drive product line from Beckhoff sets new standards in drive performance.
The AX5000 Servo Drive product line from Beckhoff sets new standards in drive performance.
19.02.08
Dual Core technology for highest performance
Beckhoff Industrial PCs with ATX or 3½-inch motherboard with Intel® Core™ Duo or Core™2 Duo processor
Beckhoff Industrial PCs with ATX or 3½-inch motherboard with Intel® Core™ Duo or Core™2 Duo processor
14.02.08
PC-based Control with Multi-Core™-Technology
Intel® Multi-Core™ Technology provides higher performance in PC-based automation technology.
Intel® Multi-Core™ Technology provides higher performance in PC-based automation technology.
14.02.08
Bus Terminals record differential and absolute pressures
The Bus Terminal system is being expanded by the new pressure measuring terminals, KM3701, KM3702, KM3712 for recording differential and absolute pressures.
The Bus Terminal system is being expanded by the new pressure measuring terminals, KM3701, KM3702, KM3712 for recording differential and absolute pressures.
info@beckhoff.com